PSDQ1-III/D Dual Power Automatic Transfer Switch (Terminal Type, Intelligent Type)

Short Description:

Product Detail

Product Tags

GENERAL

Control device: LCD controller

Product structure: small size, high current, simple structure, ATS integration

Features: fast switching speed, low failure rate, convenient maintenance, reliable performance(with automatic switching time can be adjusted, 1s～99s)

Connection: front connection

Conversion mode: power on the grid, grid generator, auto-charge&auto-recovery auto-charge & non-auto-recovery and mutual standby

Frame current: 63, 100, 225, 400, 630, 800, 1250, 1600

Product current: 20, 32, 40, 63, 80, 100, 125, 160, 200, 225, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600A

Product classification: circuit breaker (CM1, TM30)

Pole No.: 3, 4 Standard: GB/T14048.11

ATSE: CB class, with overload and short-circuit protection

• Communication module configure RS485 interface , Modbus-RTU communication protocol

• And the monitoring host computer can realize remote, telemetry, remote control, remote adjustment and other functions

Model and Meaning

Technical Requirement

◆In the automatic, when the common power supply, under-voltage, over-voltage, loss of pressure transferred to the standby power supply. When the standby power appeared in the same failure, converted to double position, display screen will display and alarm automatically at the same time.

◆LCD screen is protecting in the 30s, on the button for the first time display screen will display, the second time can enter the settings, enter setup requires a password input.

◆When the artificial set garbled (crash), the reset button reset to set the value of silence;

◆When the controller is arranged in the automatic, manual position, pressing the control panel double key display double, but not alarm.

◆The controller sets delay switching time, when there is a power failure recovery in the value set, dual power supply without switching, opposite, and switching